A final plat shall be drawn to a scale of one inch (1”) to one hundred feet (100’), or larger on a sheet or sheets a size acceptable to the Fairfield County Recorder, or other size and scale as determined appropriate by the City Engineer. The final plat shall contain the following items:
(a) Name of the subdivision and the section number, if it is a portion of the total subdivision.
(b) A description giving the situate, number of acres, city, township, county, property owner’s name, owner’s deed volume and page number.
(c) All required certifications and approvals.
(d) Requested covenants.
(e) Sheet and total number for each sheet, including covenant sheet.
(f) Scale, north indicator, and location map.
(g) The bearings and distances of the boundary lines of the subdivision including basis of bearings.
(h) The bearings and distances of all lot lines, areas, or easements dedicated to public uses within the subdivision. In case of curved sides of lots, the tangent deflection angle, the length of the tangent, the length of the radius, the length of arc and the length and bearing of the chord shall be given.
(i) Lot numbers and lot areas.
(j) The bearing and distances of all straight sections of street center lines. Curved sections of street centerlines shall show the same information as curved lot lines.
(k) Street names.
(l) Street, alley and easement widths. Any easement not parallel to property lines shall
show the bearings and distances of the lines.
(m) In the case of plats not located wholly within the City, the corporation line shall be accurately shown and measurements given to the nearest corners of the boundary lines.
(n) The location of all permanent markers or monuments.
(o) Building setback lines with their distance from the right-of-way lines.
(p) Name and registration number of the surveyor preparing the plat.
(q) Names and lot numbers of adjacent subdivisions, owners of adjoining parcels of
un-subdivided land and the location of applicable boundary lines.
(r) True angles and distances to the nearest established street centerline; section, township and/or corporation line; and/or official monument, where practical, shall be accurately tied to the plat.
(s) Other additional information as may be required by the Fairfield County Auditor.
(Ord. 5-01. Passed 2-26-01.)