1113.01 PRELIMINARY SUBDIVISION PLAT.
   A preliminary plat shall be drawn to scale and submitted on a sheet or sheets of eighteen inches (18”) by twenty-four inches (24”) inches or twenty-four inches (24”) by thirty-six inches (36”), or other size as determined appropriate by the City Engineer. The preliminary plat shall include the following items:
   (a)   Proposed name of the subdivision and its situate.
   (b)   Location map showing the proposed subdivision and street map for a two (2) mile radius.
   (c)   Names and addresses of Owners and Developers.
   (d)   Name, address and registration number of the Engineer or Surveyor preparing the plat.
   (e)   Date, north arrow and plan scale. Scale shall be one inch (1”) equals 100 square feet or larger scale.
   (f)   Boundary lines of the proposed development and the total acreage encompassed therein, including tax parcel I.D. numbers.
   (g)   Locations, widths and names of all existing public streets or other public ways, railroad and utility rights of way or easements, parks and other public open spaces, permanent buildings and structures; section, corporation lines, wellhead protection, or historic district adjacent to the tract.
   (h)   Existing sewers, water mains, culverts and other underground facilities within the tract, adjacent to the tract or that will be used in developing the tract, indicating pipe sizes, grades and locations.
   (i)   The adjoining lines of adjacent tracts, parcels or lots, and names of property owners, and, in the case of a replat of an existing subdivision, the existing lot lines.
   (j)   Existing zoning.
   (k)   Existing drainage channels, wooded areas, watercourses and other significant physical features, including topography with contour lines based on USGS data at not more than a two-foot (2’) difference in elevation.
   (l)   Layout of proposed streets, including their names and rights of way, easement sewers, waterlines, culvert and other major improvements.
   (m)   Layout, numbering and dimensions of lots, including side yard, rear yard, and building setbacks.
   (n)   Parcels of land intended to be dedicated or temporarily reserved for public use or Reserved by deed covenant with the conditions proposed for such covenant, and for the dedications.
   (o)   Tentative street grades and sewer size and slope.
   (p)   Proposed phasing.
   (q)   Any required buffer or screening areas.
   (r)   Development type and density for each zoning use.
   (s)   List of all proposed variances.
(Ord. 5-01. Passed 2-26-01.)