(A) Purpose.The purpose of the R2 Single-Family Residential District is to provide for compatible land, building, and structure uses primarily oriented to low density residential purposes and open space uses. It is the intent of the R2 District to recognize the existence of small lot conventional single-family development which presently exists in the town.
(B) Permitted uses. Uses permitted in the R2 Single-Family Residential District shall be in accordance with § 151.012.
(C) Density, area, yard, height, and lot coverage requirements. The requirements regulating the maximum permissible residential density, minimum lot size, minimum yard sizes, maximum building height, and maximum percent of lot coverage by buildings, as pertains to the R2 Single-Family Residential District shall conform with the provisions provided in the area requirements for the R2 District table.
R2 Single-Family Residential District Area Requirements |
R2 Single-Family Residential District Area Requirements | |
Minimum lot area | 9,000 sq. feet |
Minimum lot width | 70 feet |
Minimum lot depth | 100 feet |
Minimum front yard | 25 feet |
Minimum side yard (interior) | 10 feet on one side, and 15 feet on the other side |
Minimum side yard (street) | 20 feet |
Minimum rear yard | 10 feet |
Maximum building height | 35 feet |
Minimum dwelling size | 1,300 sq. feet |
(D) Off-street parking and loading requirements. Off-street parking requirements pertaining to sues allowed in the R2 Single-Family Residential District shall conform to the provisions of § 151.027.
(E) Accessory building and structure regulations. Area regulations for accessory buildings or accessory structures shall be in compliance with § 151.025.
(F) Masonry exterior requirements. All principal buildings and structures shall be of 85% masonry exterior construction. Masonry exterior construction for accessory buildings and structures shall be regulated according to § 151.025.
(Ord. 312, passed 6-22-2010; Ord. 335, passed 5-23-2012)