(A) No person shall construct a driveway entering any street without a permit therefor from the Building Inspector. The fee for such permit shall be as determined by the Board of Trustees.
(B) Culverts shall be required at the point of the entrance of the driveway to the public road. The length and width of the culvert shall be in accordance with good engineering standards and subject to the approval of the Village Engineer. In the event driveways are altered where there have been no previous culverts or the previous culverts are inadequate, according to good engineering standards, new culverts shall be installed by the owner of the property. The culverts shall be of a length and width determined by good engineering standards and subject to the approval of the Village Engineer.
(C) If, in the judgment of the Village Engineer, culverts are needed to remove any obstructions to the drainage ditches, the village shall install a culvert of the size and length determined according to good engineering standards set by the Village Engineer. Only the cost of such culvert shall be borne by the owner of the property. The village shall bear the cost of installation and regraveling or repaving of that portion of any driveway that may be affected by the installation of such culvert.