(a) General. The subdivider may submit a sketch plan prior to submitting a preliminary plat. The purpose of submitting the sketch plan is to afford the subdivider an opportunity to obtain the advice and assistance of the town planning staff in order to facilitate the subsequent preparation and approval of the preliminary plat. This procedure does not require formal application or fee.
(b) Suggested information. It is suggested that the sketch design plan depict or contain the following information:
(1) A sketch vicinity map showing the location of the subdivision in relation to neighboring tracts, subdivisions, roads, and waterways;
(2) The boundaries of the tract and the portion of the tract to be subdivided;
(3) The total acreage to be subdivided;
(4) The existing and proposed uses of the land within the subdivision and adjoining it;
(5) The proposed street and lot layout and whether public or private;
(6) The name, address, and telephone number of the owner;
(7) Streets and lots of adjacent developed or platted properties;
(8) The zoning classification of the tract and adjacent properties, if applicable;
(9) The proposed water and sewer system; and
(10) Depiction of all forested areas proposed to be protected plus individual significant trees outside protected forest areas. Clear identification of those forest areas and individual trees proposed to be protected and those forest areas and individual trees proposed to be removed.
(Code 1989, § 91.16; Ord. of 10-10-2006; Ord. of 11-14-2006)