(A) Terraces. A terrace shall not be considered as a part of the structure in determining the lot area if such terrace is unroofed.
(B) Unenclosed porches; one story. An unenclosed, one-story porch, erected on piers, even though roofed over, may project into a required front, side or rear yard area a distance not to exceed six feet and shall not be considered in the determination of the size of yards or lot coverage; provided, however, that such porch shall not be closer than four feet at any point to any lot line, and that no building shall have such porches projecting into more than required side yard.
(C) Enclosed porches. Any two-story or any enclosed porch, or one having a solid foundation and capable of being enclosed, shall be considered a part of the building in the determination of the size of yard or lot coverage.
(D) Projecting architectural features. The space in any required yard shall be open and unobstructed except for the ordinary projection of window sills, belt courses, cornices, eaves, roof overhanging and other architectural features of residential properties; provided, however, that such features shall not project more than a maximum of four feet from the exterior wall of the building and provided that such features do not reach closer than four feet from the side lot lines.
(E) Projecting architectural features of business properties. All overhanging canopies, marquees, awnings and similar structures must be at least six feet, eight inches above the sidewalk at any point, and overhanging signs must be a minimum of eight feet above the sidewalk at any point. Such structures cannot project nearer than one foot from any driveway.
(F) Fire escapes. Open fire escapes may extend into any required yard not more than four feet six inches.
(G) Location of accessory buildings. Any accessory building within 12 feet of a residential building shall be at least five feet from the side lot line. Any accessory building more than 12 feet from a residential building shall be at least three feet from the rear lot line, except where there is an alley it must be at least five feet from the rear lot where the doors open to the alley.
(H) Fences and walls.
(1) Location. Fences and walls, including all the posts, bases and other structural parts must be located completely within the boundaries of the lot on which it is located. No fence or wall may be located closer than 12 inches to a public sidewalk or curb or 24 inches on any alley.
(2) Measurement. The height of fences and walls is measured from the ground level at the base of the fence to the highest point of the fence or wall.
(3) Maximum height. Front yard and corner side is four feet. Side yard is six feet.
(4) Design and construction.
(a) Permitted materials in residential and agricultural districts.
1. Wood;
2. Wrought iron;
3. Vinyl (that is designed to look like wood or wrought iron);
4. Brick;
5. Stone;
6. Chain link, except in the front and corner side yard; and
7. Other similar materials approved by the Zoning Committee.
(b) Permitted materials in business and manufacturing districts.
1. Wood;
2. Wrought iron;
3. Vinyl (that is designed to look like wood or wrought iron);
4. Brick;
5. Stone; and
6. Chain link. When chain link fencing is used along a front or corner side lot line in a business or manufacturing district, the side fence nearest the street right-of-way must be planted with shrubs with a minimum of three feet in height.
(c) Finished side. All fences and walls must be constructed with the finished surface facing the exterior of the property with support posts placed to the inside, except in such cases where the posts or support columns are an integral part of its aesthetic design.
(d) Barbed wire and electric fences. Barbed wire, razor wire, concertina and the electrification of fencing are prohibited.
(e) Maintenance. It is the responsibility of the owner and/or occupant of the property where a fence or wall is erected to maintain the structure in good repair and structurally sound condition at all times, with no loose, rolling or rusting materials, and with all structural components attached in accordance with common building practices. If a fence is not in compliance with this section, the Zoning Officer may order the fence to be repaired, replaced or removed.
(Ord. passed 2-25-1960; Ord. 2009-4, passed 7-13-2009)