(A) After approval of the primary plat by the Plan Commission and fulfillment of the requirements of this chapter, the petitioner shall submit an application for final major subdivision approval and 14 reproductions of the final major subdivision plat of the subdivision to the Plan Director.
(B) All final major subdivision plats shall be shown at a scale between 50 feet to one inch or 100 feet to one inch, whichever provides more detail and fits on one sheet. Sheets shall not exceed 18 inches by 24 inches in size.
(C) The final major subdivision plat shall include the following:
(1) Plat sheet(s) showing:
(a) Accurate metes and bounds legal description of the tract boundary.
(b) Proof of ownership or permission from property owner(s).
(c) Name of subdivision followed by the words "final plat".
(d) Name, address, and phone number of the petitioner.
(e) North arrow/point, numeric and graphic scale and date.
(f) Primary certificate(s) blocks for the Plan Commission approval (see Appendices A and B).
(g) Fully executed land surveyor certificate (See Appendix C).
(h) Fully executed dedication certificate (See Appendix D).
(i) Drainage certificate and flood hazard certificate (Appendices E and F)
(j) The final major subdivision plat may include all or only a part of the primary plat which has received approval. If the final major subdivision plat does not contain all of the land approved on the primary plat, it shall be designated by a section number in a numerical order.
(2) Proposed conditions:
(a) Accurate boundary lines with bearings and dimensions, and a reference to a legal survey per state statute.
(b) Accurate distances and directions to the nearest official monument. Reference corners shall be accurately described on the plat.
(c) Accurate locations of all existing and recorded streets intersecting the boundaries of the tract.
(d) Street names.
(e) Complete curve data table(s) for all curves included on the plat.
(f) Street center lines and right-of-way lines with accurate dimensions to hundredths of feet, with angles to street, alley, and lot lines. Radii, points of curvatures, tangent bearings, and lengths of all arcs of street center lines and right-of-way lines shall be provided.
(g) Lot numbers and dimensions including the square footage of each lot.
(h) Accurate locations and dimensions of easements, description of their use and any limitations on such semi-public or community use.
(i) Accurate dimensions for any property to be dedicated or reserved for public, semi-public, or community use, including sidewalks, bikeways, and other recreational ways.
(j) Building lines and setback dimensions throughout the subdivision.
(k) Location, type, material, and size of all monuments and markers set or to be set per "Rule 12".
(l) Restrictions of all types which will run with the land and become covenants in the deeds for lots.
(m) The boundary of the floodway, the 100-year floodplain or flood insurance rate map special flood hazard area and the base flood elevation where available.
(n) Final covenant language which includes appropriate maintenance and responsibility language.
(o) Any other information or data requested by Plan Commission necessary to clarify conditions and terms of primary plat approval.
(3) An agreement in the form of surety bonds executed by the petitioner(s) and approved by the City of Kokomo to construct and install all improvements in accordance with the plans and specifications approved by the Plan Commission and accompanying the final major subdivision plat (see §§ 155.42 and 155.43).
(Ord. 6405, passed 4-10-06)