(A) All single-family dwelling units shall comply with the following design standards regardless of the zoning district in which said single-family dwelling unit is situated:
(1) The roof pitch shall be minimum of 3:12.
(2) Roofing material shall be of a type that is in compliance with the West Virginia State Building Code.
(3) Roof overhang or eaves shall be designed for a minimum of six inches as measured from the vertical side of the building and not including rain gutters, which are required.
(4) The unit’s exterior finish shall be wood siding, vinyl siding, composite siding (cement board), stone, brick or other material approved by the West Virginia State Building Code.
(5) A perimeter enclosure is required in accordance with the West Virginia State Code. For manufactured housing units, all tow bars, axles and wheels shall be removed. The housing unit shall rest on a required foundation or basement as a permanent structure.
(6) No housing unit shall be less than 24 feet in width.
(B) This section shall be read in conjunction with all other sections adopted by the City of Kingwood in regard to mobile homes, zoning, structures and building and other matters pertaining to the building of homes within the municipal boundaries.
(Ord. - -, passed 11-14-2006)