Every vehicle used as a taxicab shall meet the requirements of this section. If the City Council finds that a vehicle does not meet these requirements, it may order that the vehicle be removed from taxicab service.
(A) Conformance to the manufacturer’s specifications. The vehicle body should conform to the general specifications of the manufacturer.
(B) Exterior paint work. All exterior work shall be maintained in good condition, free of substantial rust, dents, scratches, chips and abrasions.
(C) Springs. The springs or other material used to support the seating areas of the passengers shall be maintained to assure an elastic coefficient of at least 90% of the manufacturer’s specifications.
(D) Suspension components. All suspension components affecting the ride and safety of the vehicle shall be maintained so that they comply with the manufacturer’s specifications.
(E) Windshields, windows. All windshield and window glass shall be maintained free from cracks, scratches, pitting, abrasions or any other condition that reduces clarity of vision below the level specified by the manufacturer. Windows shall not rattle and shall not be difficult to open or close.
(F) Safety. The vehicle must meet the state’s vehicle safety inspection requirements at all times.
(G) Heater and air-conditioner. The taxicab vehicle must be equipped with an operating heater and an operating air-conditioner.
(H) Headlights, taillights and parking lights. There shall be no broken or cracked headlights, taillights or parking lights.
(Prior Code, § 17-58) (Ord. passed 5-26-1992) Penalty, see § 116.999