A. Engineering Plans Required: After the approval of the preliminary plan and prior to filing an application for approval of the final plat, the subdivider shall submit to the village administrator ten (10) complete sets of engineering plans and specifications for the land improvements required by this title along with a single estimate of the cost of the proposed improvements. One complete set of plans shall also be submitted by the subdivider to the village engineer and village planner. Said plans and specifications shall bear the seal of the design and shall include the following documents:
1. Topographic Map: A topographic map of the proposed subdivision at a minimum scale of one inch equals one hundred feet (1" = 100') or larger, the limits of which shall extend at least one hundred feet (100') beyond the limits of the proposed development or a grading plan of the subdivision showing the existing grades, the floor grade of the proposed structures, the direction of flow of surface runoff, the finished grade of all corners of a lot, etc.
2. Construction Drawings: Construction drawings with a minimum horizontal scale of one inch equals fifty feet (1" = 50') and a vertical scale of one inch equals five feet (1" = 5'). Existing and proposed construction are to be shown on these drawings.
3. Detail Sheets: Detail sheets of the village showing the various standards for streets, manholes, catch basins, valve boxes, sewer services, shall be attached to and made a part of the subdivider's construction drawings.
4. Specifications: Complete set of specifications covering the work to be done.
B. Review By Village Engineer: The village engineer and other public officials having jurisdiction shall approve such engineering and specifications or set forth the revisions necessary for approval. Based upon the conditions of approval of the plans and specifications, the subdivider shall have prepared, by a registered engineer, final plans and specifications covering such required land improvements. Such plans and specifications shall be approved by the village engineer and other public officials having jurisdiction and such approval shall be certified on the final plat. (Ord. 99-O-791, 6-7-1999)