(A) After approval of the preliminary plat and the fulfillment of all the requirements and standards of this chapter, the final plat shall be drawn in ink on tracing cloth, mylar or equal, on sheets of the same size and scale as required for the preliminary. Six black-line or blueprint reproductions and the reproducible transparency of the final plat shall be submitted to the Executive Director at least 14 days prior to the date of the Commission meeting at which it is to be considered.
(B) The final plat may include all or part of the approved preliminary plat and shall show the following:
(1) Preliminary control points, approved by the Commission, or descriptions and “ties” to such control points, to which all dimensions, angles, bearings and similar data on the plat shall be referred;
(2) Tract boundary lines, right-of-way lines of streets, easements and other rights-of-way, and property lines of residential lots and other sites; with accurate dimensions, deflections angles or bearings, and radii, arcs and central angles of all curves;
(3) Name and right-of-way width of each street or other right-of-way;
(4) Location, dimensions and purpose of any easements;
(5) Number to identify each lot or site;
(6) Purpose for which sites, other than residential lots, are dedicated or reserved;
(7) Minimum building setback line on all lots and other sites;
(8) Location and description of monuments;
(9) Reference to recorded subdivision plats of adjoining platted land by record name, date and number;
(10) Certification and seal by registered land surveyor certifying to accuracy of survey and plat;
(11) Certification of title showing that applicant is the land owner;
(12) Statement by owner dedicating streets, rights-of-way and any sites for public uses;
(13) Title, scale, north arrow and date;
(14) A certificate for execution by the Commission;
(15) An acknowledgment certificate signed by a notary public;
(16) Cross-sections and profiles of streets showing grades approved by the Commission;
(17) Profiles shall be drawn to standard scales and elevations and shall be based on the state plane coordinate system;
(18) Protective covenants in form for recording; and
(19) Such other certificates, affidavits, endorsements or dedications as may be required by the Commission in the enforcement of this chapter.
(Ord. 2, passed 8-14-2006)