(A) Within 60 days from June 5, 1974, any person desiring to deposit or discharge any industrial waste into the public sewers or natural outlets of the town or any sewer connected therewith or who is now so doing shall make application to the approving authority for a permit therefor upon application forms to be obtained from the town.
(B) Grease, oil and sand interceptors shall be provided for the proper handling of liquid wastes containing grease in excessive amounts or any flammable wastes, sand and other harmful ingredients, except that such interceptors shall not be required for private living quarters or dwellings. All interceptors shall be of a type and capacity approved by the approving authority and shall be located as to be readily and easily accessible for easy cleaning and inspection. Grease and oil interceptors shall be constructed of impervious materials capable of withstanding abrupt and extreme changes in temperature. They shall be substantially constructed, watertight and equipped with easily removable covers which, when bolted in place, shall be gastight and watertight. Grease, oil and sand interceptors shall be maintained by the permittee, at his or her expense, in continuously efficient operation at all times.
(C) Within 60 days from June 5, 1974, any person discharging or desiring to discharge an industrial waste mixture into the public sewers or natural outlets of the town or any sewer connected therewith shall provide and maintain in a suitable, accessible position on the permittee’s premises, or such premises occupied by him or her, an inspection chamber or a manhole near the outlet of each sewer, drain, pipe, channel or connection which communicates with the sewer or sewer works of the town or any sewer connected therewith. Each such manhole or inspection chamber shall be of such design and construction which will prevent infiltration by ground and surface waters and be filtered by screens with a maximum opening of one inch, but sufficient fineness to prevent the entrance of objectionable sludge of solids to the sanitary sewer system, and shall be so maintained by the person discharging wastes so that any authorized representative or employee of the town may readily and safely measure the volume and obtain samples of the flow at all times. Plans for construction of the control manholes or inspection chambers, including such flow measuring devices as may be required, shall be included with the industrial sewer connection application.
(D) Sampling of the effluent of waste discharges may be accomplished manually or by use of mechanical equipment to obtain a composite sample which would be representative of the total effluent. Samples shall be taken at six-month intervals to establish the BOD suspended solids and chlorine demand of the industrial waste for billing purposes, or at such intervals as determined by the approving authority as necessary to maintain a control over the discharges from the permittee. The method used in the examination of all industrial wastes to determine BOD suspended solids, chlorine demand and prohibited wastes shall be set forth in Standard Methods.
(1996 Code, § 128-45) Penalty, see § 10.99