In the R3.1 and R3.2 Multiple-Family Residential Districts, every multiple dwelling or group of buildings within a group housing development hereafter constructed or structurally altered shall be located on sites of no less than specified below:
(A) When developed under PURD (§ 152.294), the minimum site will be no less than five acres.
(B) When developed in an R3.1 District, re-zoned from an R1 or OAC District, the minimum site will be no less than two acres.
(C) When developed under either divisions (A) or (B) above, the following prescribes specific area allowances:
(1) Twenty thousand square feet for the first dwelling unit of each multiple dwelling structure;
(2) Two thousand square feet for each additional dwelling unit containing two or more bedrooms; and
(3) One thousand five hundred square feet for each additional dwelling unit containing one bedroom.
(D) When developed in an R3.2 District, rezoned from an R2 District, the minimum site for one apartment building will be four standard R2 lots (66 feet by 132 feet). All plans for apartment units in the R3.2 District will be based on the following area allowances:
(1) Fifteen thousand square feet for the first dwelling unit of each multiple dwelling structure;
(2) One thousand five hundred square feet for each additional dwelling unit containing two or more bedrooms; and
(3) One thousand square feet for each additional dwelling unit containing one bedroom.
(Prior Code, § 753.04) Penalty, see § 10.99