(A) The definitions contained in § 157.008, Definitions, are intended to make comparison possible between the definitions of terms in this chapter for lots, conventional platted lots, and subdivisions and to ensure that the standards in the zoning ordinance are properly and uniformly applied to condominiums and site condominium projects.
(B) Site condominium projects in single-family residential districts shall comply with all setback, height, coverage, and area restrictions in § 157.009 in the same manner as these standards would be applied to lots and platted lots in a subdivision. Site condominium projects also shall conform to the design layout and improvement standards in Ch. 153, however, the plat review and approval process required by Ch. 153 shall not apply to site condominiums. Multiple-family residential buildings shall meet the standards for multiple-family developments.
(C) The relocation of boundaries as defined in § 148 of the Condominium Act, Public Act 59 of 1978, being M.C.L.A. § 559.148, shall conform to all setback requirements of § 157.009 for the district in which the project is located, shall be submitted to the Planning Commission and/or Zoning Commission, as required, for review and approval and these requirements shall be made a part of the by-laws and recorded in the master deed.
(Ord. 259, passed 10-24-1995; Ord. passed 2-1-2012)