Table 6: Nonresidential and Mixed Use Standards identifies the specific development standards that apply to each of the non-residential zoning districts.
Table 6: Nonresidential and Mixed Use Standards | |||||
Development standard | Business “C” | Business and Residential “D” | Industrial “E” | Historic and Business “G” | Additional Regulations (notes below) |
Table 6: Nonresidential and Mixed Use Standards | |||||
Development standard | Business “C” | Business and Residential “D” | Industrial “E” | Historic and Business “G” | Additional Regulations (notes below) |
Minimum lot area | 10,000 sq. ft. | 10,000 sq. ft. | 43,560 sq. ft. (1 acre) | 4,800 sq. ft. | C |
Minimum floor area of dwelling unit | — | 500 sq. ft. per dwelling unit for multi- family uses | — | 500 sq. ft. per dwelling unit for multi- family uses | |
Minimum lot width | 38 feet | 38 feet | 38 feet | 38 feet | |
Maximum height | 100 feet | 100 feet | 100 feet | 75 feet | |
Minimum front yard setback | 20 feet | 20 feet | 20 feet | 20 feet | A |
Minimum side yard setback | 5 feet | 5 feet | 5 feet | — | B |
Minimum rear yard | 20 feet | 20 feet | 20 feet | — | |
Accessory buildings | May occupy in the aggregate not over 40% of the required rear yard plus 50% of any additional space in the rear of the principal building | May occupy in the aggregate not over 40% of the required rear yard plus 50% of any additional space in the rear of the principal building | May occupy in the aggregate not over 30% of the required rear yard plus 50% of any additional space in the rear of the principal building | Must be located in the rear yard | |
Accessory buildings maximum height | 20 feet | 20 feet | 20 feet | 20 feet | |
A. For existing nonresidential and mixed use areas, the required minimum front yard setback shall be the average of the existing front yard setbacks of all principal structures on the same side of the street and within 300 feet of the subject lot; if the average is less than the district requirement, the required minimum front setback is the average as calculated; this does not apply to panhandle lots | |||||
B. For the C, D, and E Districts, buildings that are greater than 35 feet in height, the required side yard setback shall increase one foot for every two feet of additional building height over 35 feet | |||||
C. For High Tech Industrial developments in the Business and Residential “D” District, the required lot minimum is one acre.
| |||||
(Ord. 2018-06, passed 7-9-2018, § 155.163; Ord. 2022-16, passed 9-15-2022)