1167.05 IMPROVEMENT PLAN REQUIREMENTS .

   The improvement plans shall be prepared with a horizontal scale of one inch equals fifty feet and a vertical scale of one inch equals five feet by the allotter's engineer, who shall be a registered professional engineer. An approved Regional Geodetic Survey datum and bench mark shall be shown on the plan. The improvement plans shall include the following: existing profile taken on the center line and side lines of the street, and at building lines at intervals of fifty feet and at such intermediate points where there is a sharp break in grade; approved center line profile; storm and sanitary sewers; water mains; house connections; pavement and a typical cross-section of the roadway showing underground installations and pavement and berm areas.
(Ord. 21-1965. Passed 7-13-65.)