(a) General. The final subdivision plat shall be titled as such and presented in India ink on tracing cloth or reproducible mylar at the same scale and contain the same information, except for any changes or additions required by resolution of the Planning Commission, as shown on the preliminary plat. The plat shall also be submitted in an Auto CAD file digital form. The preliminary plat may be used as the final subdivision plat if it meets these requirements and is revised in accordance with the Planning Commission's resolution. All revision dates must be shown as well as the following:
(1) Notation of any self-imposed restrictions, and locations of any building lines proposed to be established in this manner, if required by the Planning Commission in accordance with those regulations.
(2) Endorsement of the Cuyahoga County Sanitary Engineer and Cleveland Water Department.
(3) Endorsement on the plat by every person having a security interest in the subdivision property that they are subordinating their liens to all covenants, servitude, and easements imposed on the property.
(4) Lots numbered as approved by the Village Engineer.
(5) All monuments erected, corners, and other points established in the field in their proper places. The material of which the monuments, corners, or other points are made shall be noted at the representation thereof or by legend, except that lot corners need not be shown. The legend for metal monuments shall indicate the kind of metal, the diameter, length, and weight per lineal foot of the monuments.
(b) Preparation. The final subdivision plat shall be prepared by a land surveyor licensed by the State.