A. Information Required On Final Plat Or Map: The final subdivision plat or partition plat shall be presented in India ink and shall contain all information except for any changes or additions required by resolution of the City Council showing on the tentative plan or map. In addition, the following information shall also be shown on the final subdivision plat or partition plat:
1. Reference points of existing surveys identified, related to the plat or map by distances and bearings, and referred to a field book or map as follows:
a. Stakes, monuments or other evidence found on the ground and used to determine the boundaries of the subdivision or partition.
b. Adjoining corners of adjoining subdivisions or partitions.
c. Other monuments found or established in making the survey of the subdivision or required to be installed by provisions of this Title.
d. All other requirements of ORS chapter 92.
2. The exact location and width of streets and easements intercepting the boundary of the tract.
3. Tract, block and lot boundary lines and street right-of- way and center lines, with dimensions, bearings or deflection angles, radii, arcs, points of curvature and tangent bearings. Normal high water lines and the 100-year flood plain for any creek or other body of water. Tract boundaries and street bearings shall be shown to the nearest thirty (30) seconds with basis of bearings. Distance shall be shown to the nearest one one-hundredth foot (0.01'). No ditto marks shall be used.
4. The width of the portion of streets being dedicated and the width of existing right of way. For streets on curvature, curve data shall be based on the street center line. In addition to the center line dimensions, the radius and central angle shall be indicated.
5. Easements denoted by fine dotted lines, clearly identified and, if already of record, their recorded reference. If an easement is not definitely located of record, a statement of the easement shall be given. The width of the easement, its length and bearing and sufficient ties to locate the easement with respect to the subdivision shall be shown. If the easement is being dedicated by the map, it shall be properly referenced in the owner's certificates of dedication.
6. Lot numbers beginning with the number "1" and numbered consecutively in each block.
7. Block numbers beginning with the number "1" and continuing consecutively without omission or duplication throughout the subdivision. The numbers shall be solid, of sufficient size and thickness to stand out and so placed as not to obliterate any figure. Block numbers in an addition to a subdivision of the same name shall be a continuation of the numbering in the original subdivision pursuant to ORS 92.090(1).
8. Identification of land to be dedicated for any purpose, public or private, to distinguish it from lots intended for sale.
9. Building setback lines, if required, are to be made a part of the subdivision restrictions.
10. Explanations of all common improvements required as conditions of approval of the tentative plan, pursuant to subsection 12-5-2A5m of this Chapter.
11. The following certificates, which may be combined, where appropriate:
a. A certificate signed and acknowledged by all parties having any record title interest in the land, consenting to the preparation and recording of the plat.
b. A certificate signed and acknowledged as above, dedicating all land intended for public use except land which is intended for the exclusive use of the lot owners in the subdivision, their licensee, visitors, tenants and servants.
c. A certificate with the seal of and signed by the City Engineer or the surveyor responsible for the survey and final map.
d. A certificate of approval signed by the City Engineer stating that streets and roads held for private use and indicated on the tentative plan have been approved by the City pursuant to ORS 92.090(3)(b).
e. Any other certificates now or hereafter required by law.
B. Supplemental Information Required: The following data shall accompany the final plat or map:
1. A preliminary title report issued by a title insurance company in the name of the owner of the land, showing all parties whose consent is necessary and their interest in the premises.
2. Sheets and drawings showing the following:
a. Traverse data including the coordinates of the boundary of the subdivision and ties to section corners and donation land claim corners, and showing the error of closure, if any.
b. The computation of distances, angles and courses shown on the plat.
c. Ties to existing monuments, proposed monuments, adjacent subdivisions, street corners and State highway stationing.
3. A copy of any deed restrictions applicable to the subdivision.
4. A copy of any dedication requiring separate documents.
5. A list of all taxes and assessments on the tract which have become a lien on the tract.
6. A certificate by the City Engineer that the subdivider or land partitioner has complied with the requirements of this Title. (Ord. 512-96, 1-8-1996)