(A) Development of any nonresidential or commercial/industrial use shall require provision of off-street loading spaces in conformance with the following minimum requirements:
Use | Gross Floor Area (sq. ft.) | Minimum Berths |
Retail and Industrial | 0—12,000 | 0 |
12,000—48,000 | 1 | |
48,000+ | 2 | |
Office | 0—48,000 | 0 |
48,000—100,000 | 1 | |
100,000+ | 2 |
(B) The off-street loading berths shall be maintained on the same lot with the building.
(C) Each berth shall be no less than 12 feet in width, 50 feet in length and 14 feet in height.
(D) Loading berths may occupy part of any required side or rear yard, but no space may be located closer than ten feet to the rear property line.
(E) When the off-street parking space or loading berth does not abut on a street, public or private alley or easement for access, an access drive of the following minimum widths shall be provided:
(1) Two-way drive: 25 feet;
(2) One-way drive for 90-degree parking: 24 feet.
(3) One-way drive for 60-degree parking: 18 feet.
(4) One-way drive for 45-degree parking: 13 feet.
(F) The maximum width of any driveway in nonresidential districts shall be 36 feet.
(G) All off-street parking areas, driveways and loading berths shall be constructed according to standards approved by the Town Board of Trustees and on file with the Town Clerk.
(H) Notwithstanding any provision of this section, no off-street parking spaces or loading berths shall occupy the sight triangle at a corner.
(Ord. 382, passed 7-8-2021)