All accessory uses and structures shall comply with the general standards in this section.
(A) Compliance with this chapter. All accessory uses and structures shall be subject to the dimensional requirements of § 154.062, unless otherwise specified in this chapter. Accessory uses shall comply with all standards of this chapter applicable to the principal use with which they are associated.
(B) Dimensional standards for accessory buildings and structures.
(1) Same lot. The accessory use or structure shall be conducted and/or located on the same lot(s) as the principal use.
(2) Size. In the R-1, R-2, R-3 and RM Districts, the maximum size of any accessory building shall be 1,000 square feet unless otherwise approved by specific use permit. No accessory building shall be constructed until the construction of the main building has been actually commenced, and no accessory building shall be used unless the main building is also being used. In commercial and industrial districts, an accessory use shall not occupy more than 50% of the building square footage associated with the principal use.
(3) Same ownership required. The principal use and the accessory use shall be under the same ownership.
(Ord. 382, passed 7-8-2021)