§ 70.24 SCHEDULE OF FEES.
   The permit fee is based on the type and amount of work being authorized by this permit. Fees shall be paid by check or money order or credit card, if on-site or online processing is available, made payable to the "Hendricks County Engineering Department". Cash cannot be accepted.
TYPE OF WORK
FEE
TYPE OF WORK
FEE
Open road cut across or within a paved roadway
$3 per square foot of excavation ($200 minimum)
Underground linear project including grading, trenching, or excavation parallel to road
$50 for each 500 feet of continuous construction or part thereof
* Additional fees may be assessed on projects greater than one mile to cover the direct expenses of hiring consultant inspection staff.
Push or bore under road
$75 per push or bore
Placement/removal of poles/overhead lines
$75 for 1,000 feet of continuous pole line or fraction of 1,000
*Permit not required when replacing or removing a single pole in an existing location due to damage to the pole or when making a utility connection on an existing pole line.
Tap pit/spot cut dirt
$75 per tap pit/spot cut less than 100 square feet in area
*Does not include any cutting of the pavement surface.
Major commercial drive
$250 per drive
Minor commercial drive
$250 per drive
Construction/temporary drive
$100 per drive
Public road approach/private road approach
$400 per approach+ $1 per square foot of full width auxiliary lane pavement + $0.25 per square foot of road widening
Utility pull-off drive
$250 per drive
Residential drive
$150 per drive
Field entrance
$25 per entrance
 
(Ord. 2023-11, passed 3-14-2023)