(A) Manufactured homes must provide the manufacturer’s approved foundation drawings as approved by the Commissioner of Administration. Homes are not permitted to remove the frames permitted by the State Building Code.
(1) Manufactured homes must be those constructed after June 15, 1976, and must bear the HUD certification seal.
(2) Tongues on all manufactured homes shall be removed.
(3) Data plate and other information for the following are required for manufactured homes:
(a) Thirty pound roof load design;
(b) Zone 2 heating design;
(c) Adequate furnace and water heater design to include the substructure. Option - separate heating supply for substructure;
(d) Approved tap-in locations for substructure water service;
(e) Three inch vent through roof location for substructure per the state’s Department of Health;
(f) Electric interlocked smoke detector schematic; and
(g) Manufacturer’s design drawings for stairway location.
(4) The following alterations of manufactured homes requires manufacturer’s approval and the alterations must be consistent with the provisions of the State Building Code and the Manufactured Home Building Code:
(a) Relocation of furnace and/or water heater; and
(b) Alteration of any structural components including roof, walls, and floor system, attaching garages, and the like.
(B) A written statement from the applicant clarifying the above is required.
(Prior Code, § 151.078) (Ord. 149, passed 3-9-1998)