The following provisions shall further apply and shall supersede any and all references listed within the adopted edition of the International Fuel Gas Code - 2003 Edition.
(A) Additions, Insertions and Changes.
(1) Section 101.1 - Insert “Village of Hecker”.
(2) Section 106.5.2 Fee schedule: Add the following: Building Permit fee schedule is found in Addendum “A” to this Chapter.
(3) Section 106.5.3 Delete in its entirety.
(4) Section 108.4 Delete the section and add the following: The penalties shall be found in Section 1-1-20 of the Village Code.
(5) Section 108.5 Stop Work Orders - Delete the last line and insert the following:…for a fine as established by Section 1-1-20 of the Village Code.
(6) Section 109 Delete the section in its entirety and insert the following: The Village Board shall be the Board of Appeals.
(7) Reference Standards
Delete the reference to the ICC Electric Code
Delete the references to the International Plumbing Code in sections 301.6, 624.2.1.1, 624.2 and insert the Illinois Plumbing Code.
Adopt the Appendix A - D
(a) Appendix A - Sizing and Capacities of Gas Piping
(b) Appendix B - Sizing of Venting Systems Serving Appliances equipped with Draft Hood, Category I Appliances and Appliances Approved for Use with Type B Vents
(c) Appendix C - Exit Terminals of Mechanical Draft and Direct-Vent Venting Systems
(d) Appendix D - Recommended Procedure for Safety Inspection of Existing Appliance Installations