A. All single-family and two-family residences shall be provided with adequate paved driveway to park all motor vehicles of the occupants of the residence. The driveways shall have a minimum width of sixteen feet (16') and a maximum width of twenty five feet (25'), except as provided below:
1. Where the front yard setback of the building as constructed exceeds forty feet (40'), the driveway may be reduced to a width of nine feet (9').
2. Where a circular driveway has been constructed, the width of the driveway shall be a minimum of ten feet (10') and a maximum of sixteen feet (16'). The main drive from the street to the garage may also be reduced to nine feet (9').
3. Where a paved "T" area has been provided for parking of vehicles the main driveway width may be reduced to nine feet (9').
4. There shall be no requirement for a paved or a sixteen foot (16') driveway in the A-1 General Agricultural and A-2 Suburban Districts, provided that adequate parking areas for the vehicles of all occupants are provided in conformance with driveway surface requirements, and further provided that the lot meets the minimum size and area requirements for the zoning district.
5. All driveways shall be designed to intersect streets at a ninety degree (90°) angle unless an alternate design is approved by the City Engineer.
6. On a corner lot, no driveway curb cut shall be located closer than twenty five feet (25') to the right-of-way line of the intersecting street. (Ord. 1994-3, 1-20-1994)