(A) Statement of purpose. This district is composed of land and structures occupied by or suitable for heavy manufacturing and related activities. Located for convenient access to present and future arterial thoroughfares, highways and railway lines, these districts are usually separated from residential areas by business districts or natural barriers; the district regulations are designed to permit the development of the districts for almost any industrial use.
(B) Permitted use. Any use listed as permissible in Appendix A, Schedule of Uses, attached to the ordinance from which this chapter is derived, adopted by reference in § 153.272, is permitted.
(C) Conditional uses. Any use listed as conditional in Appendix A, Schedule of Uses, attached to the ordinance from which this chapter is derived, adopted by reference in § 153.272, is conditional.
(D) Standards.
(1) Building site area. There is no minimum building site area.
(2) Building site width. There is no minimum building site width.
(3) Building site coverage. The maximum building site coverage by all buildings shall be 60% of the total area.
(4) Building height limit. No structure shall exceed 60 feet in height.
(5) Setback requirements. The minimum requirements for yards shall be as follows:
(a) Front yard: 40 feet;
(b) Rear yard: ten feet shall be provided unless the District abuts a residential district, then the rear yard shall be 25 feet not including loading and docking facilities; and
(c) Side yard: ten feet each side shall be provided unless the district abuts a residential district, then the side yard shall be 20 feet not including loading and docking facilities.
(E) General requirements. Those requirements listed in the I-1 Light Industrial District shall apply.
(Ord. 2013-2, passed 2-7-2013)