The following standards shall apply in addition to the particular specification where noted in the table above:
(a) Rural District Agricultural Uses: For agricultural purposes in the determination of accessory and associated uses the lot area shall be five (5) acres or more, but this shall not exclude agricultural use of any smaller lot.
(b) Rural District Road Frontage Exception for Triangular-Shaped or Flag Lots:
(1) Road frontage and abutment requirements for "pie-shaped" lots on cul-de-sacs or curved streets may be reduced to a minimum of sixty (60) feet provided the lot has a width of one hundred fifty (150) feet or more at the front line of dwelling;
(2) Road frontage and abutment requirements may be reduced to a minimum of sixty (60) feet for flag lots, provided;
A. A minimum lot width of three hundred (300) feet is established at the front line of the dwelling. The full minimum required width shall extend in the front yard of the dwelling for a minimum distance of one hundred (100) feet.
B. The lot is at least five (5) acres in size, excluding all areas of the lot which are less than three hundred (300) feet width.
(c) The side yard requirement for pens and enclosures for the care and or husbandry of animals shall be two hundred (200) ft.
(d) A side and rear yard shall be required when adjacent to a Residential Zoning District or Planned Development Zoning District.
(1) Such required side or rear yards shall be not less than one-fourth (1/4) the height of the structure or twenty (20) feet whichever is greater.
(e) Where a use is to be serviced from the rear, such use shall have a service court, alleyway, or combination thereof not less than forty (40) feet.
(f) One-half (1/2) the height of the structure, but never less than fifty (50) feet from any Residential Zoning District, except in accordance with the development standards.
(g) A use allowed in this District shall emit no dust, smoke, noxious odor, fumes, or produce a noise level audible at any residential property line greater than the average noise level occurring on any adjacent street.
(h) A use allowed in the Limited Industrial District shall entirely enclose its primary operation within a structure except as a Conditional Use in accordance with Section 1134.03 (Actions of the Board of Zoning Appeals).
(1) Open storage and service areas and loading docks shall be screened by walls or fences at least six (6) feet but not more than twelve (12) feet in height;
(2) These walls or fences shall have opaqueness of seventy-five (75) percent or more, so as to effectively conceal production, storage, service, and loading operations from adjoining streets and from a Residential Zoning District or a Planned District.
(i) R-6 lot coverage shall include structures and required off-street parking areas.
(k) Swimming pool lot coverage is calculated independently from other structure/parking lot coverage as governed by Section 1179.01(a).
(Ord. 19-011. Passed 4-22-19.)