Skip to code content (skip section selection)
Compare to:
SEC. 9-5-95 BLOCK STANDARDS; GENERAL DESIGN.
   Block lengths, widths and areas within bounding roads shall be such that:
   (A)   Adequate building sites, suitable to the contemplated or probable use are provided.
   (B)   Zoning requirements regarding minimum lot dimensions and area are assured.
   (C)   Lengths between intersecting streets do not exceed 1,400 feet or be less than 300 feet.
   (D)   Sufficient widths are provided to allow two tiers of lots where single-tier lots are required to separate development from traffic arteries, water areas, common areas or public property. Where double frontage lots are allowed, a nonaccess easement shall be provided as specified herein.
   (E)   Planned Unoffensive Industry (PIU) and Planned Industry (PI) Districts shall be exempt from the maximum block length listed under subsection (C) above.
(Ord. No. 1941, § 1, passed 1-12-1989; Ord. No. 2098, § 2, passed 11-16-1989)