(A) When any owner of land lying within the corporate limits of the village or within the area of platting jurisdiction of the village desires to subdivide such lands, the owner shall submit to the Village Clerk, along with an application for development approval and the application fee as set forth by ordinance or resolution, a preliminary plat on tracing cloth, Mylar or equivalent material with 15 prints or copies thereof, folded to approximately nine-inch by 12-inch size, at a scale of 100 feet to the inch and shall show on its face the following information:
(1) Name under which the proposed subdivision is to be recorded;
(2) Legal description of property platted and total acreage included;
(3) Date, scale and north point;
(4) Names and addresses of the owner, subdivider, engineer and land surveyor preparing the plat;
(5) The location, widths and other dimensions of proposed streets, alleys, easements, parks, playgrounds and other open spaces proposed to be dedicated for public use;
(6) The blocks and lots into which the project is proposed to be subdivided in sufficient detail to determine the character of the development; and
(7) Location and approximate dimensions of any sites to be reserved or dedicated for parks, playgrounds, drainageways or other public use or which are to be used for multi-family housing, shopping centers, church sites or other non-public uses not requiring individual lots, including dimensions and acreage.
(B) The following information shall also be provided as part of the preliminary plat submittal:
(1) The character of the immediately contiguous lands to the proposed subdivision to a minimum distance of 200 showing the subdivision thereof, if subdivided, and the location and dimension of public streets, alleys, public utility easements, street pavements, sanitary sewer mains, storm water mains, retention and detention areas, water supply mains and electrical distribution systems, if any, adjoining the proposed subdivision;
(2) A large scale information map showing the location of the preliminary plat area;
(3) The zoning classification under the village or county zoning ordinance, and the zoning of all surrounding land indicating the applicable zoning authority (whether village or county);
(4) The location within the proposed subdivision of any existing public streets, alleys, public utility easements, street pavements, sanitary sewer mains, storm sewer mains, water supply mains, watercourses, bridges, culverts, electrical distribution system and similar facilities; and the location of existing buildings, if any;
(5) Complete sidewalk plan or pedestrian access and circulation plan;
(6) Location of existing corporate boundary lines at or near the proposed subdivision;
(7) Ground elevations on the tract. For land that slopes less than 0.5%, show one foot contours; show spot elevations at all breaks in grades, along all drainage channels or swales, and at selected points not more than 100 feet apart in all directions. For land that slopes more than 0.5%, show two-foot contours. Refer to U.S.G.S. datum in compiling data;
(8) Floodplain lines are to be delineated according to the applicable U.S.G.S. Flood Quadrangle or other documents adopted by the village as part of floodplain regulations (Chapter 151 of this code of ordinances);
(9) Preliminary engineering. Sufficient detail will be required to convey the general basis of design for the sewer, water, electric distribution, storm water runoff control and flood control facilities;
(10) Traffic and other impact studies, if any;
(11) Any other information or data that the subdivider feels the Plan Commission may require for the full and complete consideration of the proposed plat of subdivision;
(12) A summary of all restrictions, if any, intended to be imposed by the final plat or by deeds of conveyance including the location, use, height and bulk of buildings and any applicable land use, design limitations or planning schedules which the developer or subdivider represents to the Plan Commission or Board of Trustees as restrictions upon the developer’s intended design, development and use of the subject property; and
(13) Geological and soil analysis examining the adequacy of the site for the development environment.
(C) All documents, plats, supporting data and the like and revisions thereof shall be dated and properly titled and the date utilized when referencing these provisions.