(A) Each application for a private road shall be accompanied by completed plans, prepared and sealed by a civil engineer or land surveyor registered in the state, which include the information contained herein. Where the required information is incorporated in the overall site plan of a development, separate road plans shall not be required.
(B) The application and plans for a private road shall include the following information:
(1) The names and addresses of the lot or parcel owners to be served by the private road;
(2) A vicinity map, of a minimum scale of one inch equals 2,000 feet, showing the location of the private road in the village, any access roads and cross streets, road names, a scale and a north arrow;
(3) The location of the parcels being served or intended to be served by the private road, including any existing residential dwellings or accessory buildings;
(4) Any connection to existing public and private roads;
(5) The location of the proposed road and turnaround within the easement, together with proposed drainage and grading. Proposed improvements shall be shown in sufficient detail to demonstrate that the standards set forth in § 92.17 of this code are met;
(6) Existing storm drains, ditches and swales crossing the road easement or adjacent to the easement; and
(7) A complete statement of all the terms and conditions of the proposed road easement, including copies of all maintenance agreements or intended maintenance agreements regarding the maintenance and improvements of the right-of-way and roadway.
(Prior Code, § 92.18) (Ord. 26, passed 3-1-1994; Ord. 26, passed 11-6-1995)