921.06 INDUSTRIAL WASTEWATER.
   (1)    Discharge Reports.
      (a)   Every significant industrial user shall file a periodic report at such intervals as designated by the Superintendent. The Superintendent shall determine whether an industrial use is significant, and may require any other industrial users discharging or proposing to discharge into the treatment system to file such periodic reports.
      (b)   The discharge report shall include, but, at the discretion of the Superintendent shall not be limited to, nature of process, volume, rates of flow, mass emission rate, production quantities, hours of operation, concentrations of controlled pollutants or other information that relates to the generation of waste. Such reports may also include the chemical constituents and quantity of liquid materials stored on site even though they are not normally discharged. In addition to discharge reports, the Superintendent may require information in the form of self-monitoring reports.
   (2)    Records and Monitoring.
      (a)   All industrial users, who discharge or propose to discharge wastewaters to the wastewater treatment system, shall maintain such records of production and related factors, effluent flows, and pollutant amounts or concentrations as are necessary to demonstrate compliance with the requirements of this code and any applicable state or federal pretreatment standards or requirements.
      (b)   Such records shall be made available upon request by the Superintendent. All such records relating to compliance with pretreatment standards shall be made available to officials of the Ohio Environmental Protection Agency and/or the U.S. Environmental Protection Agency upon demand. A summary of such data indicating the industrial user's compliance with this code shall be prepared as requested and submitted to the Superintendent.
      (c)   The owner or operator of any premises or facility discharging industrial wastes into the system shall install and maintain, at his own cost, suitable control manholes, access points, and monitoring equipment to facilitate the accurate observation, sampling and measurement of wastes. Such equipment shall be maintained in proper working order and kept safe and accessible at all times. Sampling methods, location, times, durations and frequencies are to be determined on an individual basis subject to approval by the Superintendent.
      (d)   Wastewater volume determination. The volume of flow used for computing industrial waste surcharges shall be the metered water consumption of the person except as herein provided in this paragraph.
   If the person discharging industrial wastes into the public sewers procures any part, or all, of this water from sources other than a metered, public water system, all or part of which is discharged into the public sewer, the person shall install and maintain, at his cost, water meters of a type approved by the Village and the engineer for the purpose of determining the volume of water obtained from those other sources. Access to these meters shall be made available to representatives of the Village at any reasonable time. The accuracy of the meters shall be verified at the discharger's expense on a minimum once per year basis or at the request of the Superintendent, by an independent testing company.
   The person discharging industrial wastes into the public sewers may install and maintain, at his cost, metering devices for determining the volume of waste being discharged to the public sewer from which the industrial waste surcharge would be computed. The measuring devices shall be of a type acceptable to the Village.
   The engineer may require the installation of devices for measuring the volume of waste discharged if these volumes cannot otherwise be determined from the metered water consumption records. Any metering device for determining the volume of waste discharged to the public sewer shall be installed, owned and maintained by the person responsible for its discharge. Following approval and installation, such meters may not be removed without the consent of the Village.
      (e)   The monitoring equipment shall be located and maintained on the industrial user's premises outside of the building. When such a location would be impractical or cause undue hardship on the user, the Superintendent may allow such facility to be constructed in the public right of way with the approval of the public agency having jurisdiction over such right-of-way and located so that it will not be obstructed by public utilities, landscaping or parked vehicles.
      (f)   Whether constructed on public or private property, the monitoring facilities shall be constructed in accordance with the Superintendent's requirements and all applicable construction standards and specifications.
   (3)    Inspection, Sampling, Analysis and Surcharge rates.
      (a)   Compliance determination. Compliance determinations with respect to Section 921.02 , prohibitions and limitations may be made on the basis of either instantaneous grab samples or composite samples of wastewater. Composite samples may be taken over a twenty-four hour period or over a longer or shorter time span, as determined necessary by the Superintendent to meet the needs of specific circumstances.
      (b)    Sampling and monitoring. Industrial wastes discharged into the public sewers shall be subject to periodic inspection with a determination of character and concentration of the wastes. The determination shall be made as often as may be deemed necessary by the Village, but in no case less than two, twenty-four hour composite samples per month. The owner shall be responsible for the collection and testing of the aforementioned samples. Samples shall be collected in such a manner as to be representative of the composition of the wastes. The sampling shall be accomplished by the use of flow proportionate automatic sampling equipment capable of collecting composite samples. Access to sampling locations shall be granted to the Village Superintendent or his authorized representative at all times. Every care shall be exercised in the collection of samples to insure their preservation in a state comparable to that at the time the same was taken.
      (c)   Analysis of industrial wastewaters. Laboratory analysis of industrial wastewater samples shall be performed in accordance with the current edition of Standard Methods or the Methods for Chemical Analysis of Water and Waste published by the U.S. Environmental Protection Agency. Analysis of those pollutants not covered by these publications shall be performed in accordance with procedures established by the State Environmental Protection Agency. However, alternative methods for certain analyses of industrial wastes may be used subject to mutual agreement between the Village and the person responsible for its discharge. Determination of the character and concentration of the industrial wastes shall be made by the person responsible for the discharge, or his qualified agent, as approved by the Village The results
of the analyses shall be reported to the Village on a monthly basis on forms provided by the Village. The Village shall make its own analyses on the wastes and these determinations shall be binding as a basis for charges except under circumstances in the following paragraph.
   In case the analyses performed by the industry and the Village result in substantially different values, an effort shall be made by the industry to collect samples at the same time the Village collects its own samples. The results of the analyses on the samples collected by the Village and the industry shall be compared using the same testing procedures as outlined in the latest edition of Standard Methods and the differences negotiated.
      (d)   Industrial Waste Surcharge.
   Industrial waste water into the public sewers as determined by this code shall be subject to surcharges determined monthly on the basis of the following formula:
            Pounds of excess parameter per day x $0.253 = Surcharge
   The pounds per day of excess parameter shall be determined by the following equation: mg/l (milligrams per liter) of excess parameter x8.34x millions gallons= pounds CBOD5 equals pounds of biochemical oxygen demand per month in excess of (275) mg/l concentration in the wastewater. S.S. equals pounds of suspended solids per month in excess of (300) mg/l concentration. NH3-N equals pounds of ammonia nitrogen per month in excess of (35) mg/l concentration.
   In the foregoing formula $0.253 refers to the total expenditures per pound of BOD, suspended solids, and nitrogen ammonia respectively, to collect, convey and treat the wastewater, which shall be determined annually by the Village. Industrial cost recovery will be established, if an industrial user begins discharging, in accordance with CFR 35.928 or latest revisions thereto, if determined applicable.
         (Ord. 07-15. Passed 6-17-15.)