(a) Setback. Except as otherwise permitted, all freestanding signs and flagpoles shall be set back from any public right-of-way at least the height of the sign or flagpole.
(b) Illumination.
(1) Definitions.
A. "Candela" means the basic unit of measurement of light in SI (metric) units.
B. "Candela per square meter (cd/m²)" means the SI (metric) unit used to describe the luminance of a light source or of an illuminated surface that reflects light, also referred to as Nits.
C. "Nit" means a photometric unit of measurement referring to luminance. One nit is equal to one cd/m².
D. "SI (International System of Units)" means the modern metric system of measurement, abbreviated SI for the French term "Le Systeme International d'Unites."
(2) A sign in any district may be illuminated at night. Signs that are illuminated at night may not exceed a maximum luminance level of seven hundred and fifty (750) cd/m² or Nits, regardless of the method of illumination, at least one-half hour before Apparent Sunset, as determined by the National Oceanic and Atmospheric Administration (NOAA), US Department of Commerce, for the specific geographic location and date. All illuminated signs must comply with this maximum luminance level throughout the night, if the sign is energized, until Apparent Sunrise, as determined by the NOAA, at which time the sign may resume luminance levels appropriate for daylight conditions.
(3) The maximum luminance during daylight conditions, between Apparent Sunrise and one-half hour before Apparent Sunset, shall be ten thousand (10,000) cd/m² or Nits.
(4) All permitted and conditional use signs may be backlit, internally lighted, or indirectly lighted, subject to lighting limitations in this code. All external sign lighting shall have lighting fixtures or luminaires that are fully shielded.
(5) Temporary signs shall not be lighted
(c) Material. Signs shall be of quality design, construction, color, and materials consistent with the design of the building and/or development. This includes glass, masonry, wood, natural stone, ornamental metalwork, and ceramics. Paint and metal gilt work are also acceptable. Signs painted on cloth awnings are permissible. Signs shall be constructed of durable materials.
(d) Maximum Height Measurements. Wall signs and other signs with sign structures not affixed to the ground are measured from the lowest attached component of the sign to the highest attached component of the sign. The height for signs with sign structures affixed to the ground is measured as the distance from the base of the sign at normal grade to the top of the highest attached component of the sign, subject to limitations in this article. Normal grade is the lower of:
(1) Existing grade prior to construction; or
(2) The newly established grade after construction, exclusive of any filling, berming, mounding, or excavating primarily for the purpose of mounting or elevating the sign.
(e) Measurement of Sign Area. Sign area is calculated under the following principles:
(1) With signs that are regular polygons or circles, the area can be calculated by the mathematical formula for that polygon or circle. With signs that are not regular polygons or circles, the sign area is calculated using all that area within a maximum of three abutting or overlapping rectangles that enclose the sign face.
(2) The permitted area of a double-faced a-frame sign shall be considered to be the area on one side only. If one face contains a larger sign area than the other, the larger face shall be used in calculating the sign area.
(3) For projecting signs, the sign area also includes the area of the visible sides of the sign, calculated as a rectangle enclosing each entire side view.
(4) Supports, uprights, or structures on which any sign is supported shall not be included in determining the sign area unless such supports, uprights, or structure are designed in such a way as to form an integral background of the display; except, however, when a sign is placed on a fence, wall, planter, or other similar structure that is designed to serve a separate purpose other than to support the sign, the entire area of such structure shall not be computed.
(5) In instances where there are multiple tenants or users on a property or in a building, allowable sign area for all parties shall not exceed the maximum sign area computed based upon the number of tenants multiplied by forty (40) square feet per tenant. In no case shall any tenant sign exceed forty (40) square feet.
(f) Wall Signs. Wall signs shall provide as part of a zoning permit application:
(1) Express permission from the operator and/or owner of the building;
(2) The name and address of the person applying or installing the wall sign; and
(3) A clear drawing of the proposed wall sign including dimensions and its location.
(g) Electronic message displays shall be placed perpendicular to residential structures and shall comply with Federal Communications Commission regulations, including the avoidance of harmful interference with radio frequencies. (Passed 8-28-18.)