1113.01 STANDARDS FOR IMPROVEMENTS.
   Before Council will officially accept any improvements in a subdivision and become responsible for their maintenance, supervision and repair, such improvements shall be constructed to the following standards and Council shall have received a certificate from the City Engineer that the improvements conform to the following standards:
   (a)   Street improvements shall conform to the Construction and Material Specifications of the City in effect at the time the improvements are made. All streets shown on the plat shall be for the full width of the right of way to grades and proper drainage facilities approved by the City Engineer, and such streets shall be paved to a minimum width of twenty-eight feet back to back of curbs, with a concrete pavement six inches thick with integral curbs or a water-bound macadam base eight inches thick with separate concrete curbs and gutters and two asphaltic concrete surface courses each one and one-half inches in thickness. The above widths and types of pavement are minimum requirements for fifty-foot rights of way and may be increased if Council decides wider pavements and increased thicknesses are necessary.
   (b)   Monuments shall be placed at angle points, points of curves in streets and at such points as shall be required by the City Engineer or at related points approved by the City Engineer. Monuments shall be of such material, size and length as may be approved by the City Engineer.
   (c)   Water distribution facilities shall be constructed in accordance with the Construction and Material Specifications of the City in effect at the time of construction.
   (d)   Sidewalks may be required by Council. Such walks shall be at least four feet wide and shall conform to the Construction and Material Specifications of the City in effect at the time of construction.
   (e)   Street lighting facilities shall be installed in accordance with the Construction and Material Specifications of the City in effect at the time of construction.
   (f)   Storm and sanitary sewer facilities shall be constructed in accordance with the City of Grandview Heights Stormwater Design Manual and the Construction and Material Specifications of the City in effect at the time of construction.
      (Ord. 2009-04. Passed 2-16-09.)