Monuments shall be placed at block corners, angle points, points of curves in streets and such other locations as may be required by the Village Engineer. Monuments set in paved areas shall be of permanent hard stone or concrete, 30 inches in depth and 6 inches square with an iron or brass pin cast in the center with the top set 10 inches below the established grade of the pavement and covered by a cast iron monument box with a removable cover. Monuments set outside of paved areas may be iron rod, not less than 3/4--inch in diameter and 24 inches in length, and shall be set with the tops even with the established finish grade.
(Ord. 650. Passed 3-19-63.)