(A) Set back or front yard. In an M-1, M-2, and M-5 Manufacturing District, no building shall be erected less than a distance of 25 feet from the front lot line.
(B) Side yards. Each lot in an M-1, M-2, and M-5 Manufacturing District shall have two side yards one on each side of the building. The width of each of two side yards shall not be less than five feet, plus one foot for every four feet or portion thereof above 16 feet in height of the building as measured at the tallest point of the building.
(C) Rear yards. Each lot in an M-1, M-2, and M-5 Manufacturing District shall have a rear yard the depth of which shall not be less than ten feet; provided that, unattached accessory buildings with a ground floor area of 1,440 square feet or less may be located in the rear yard in accordance with § 154.057. Accessory buildings with areas greater than 1,440 square feet shall be subject to all provisions hereof.
(D) Minimum dimension. No lot in an M-1, M-2, and M-5 Manufacturing District shall be constructed upon which has a frontage of less than 60 feet.
(E) Maximum use. No lot in an M-1, M-2, and M-5 Manufacturing may have constructed upon it buildings or storage areas which reduce the area of lot to an area upon which off-street parking cannot be provided for all employees vehicles of the occupying enterprise or of the type of enterprise which might be expected to occupy the buildings.
(Ord. passed 6-9-1947; Ord. passed 12-19-1949; Ord. passed 7-8-1955; Ord. passed 11-16-1959; Ord. passed 3-28-1960; Ord. passed 7-8-1974; Ord. passed 4-28-1975; Ord. 8.24, passed 9-17-1979; Ord. 8.46, passed 1-25-2010)