The following general and specific standards shall apply.
(A) General standards.
(1) When possible, existing natural drainageways, wetlands and vegetated soil surfaces must be used to convey, store, filter and retain stormwater runoff before discharge to public waters.
(2) Development must be planned and conducted in a manner that will minimize the extent of disturbed areas, runoff velocities, erosion potential and reduce and delay runoff volumes. Disturbed areas must be stabilized and protected as soon as possible and facilities or methods used to retain sediment on the site.
(3) When development density, topographic features and soil and vegetation conditions are not sufficient to adequately handle stormwater runoff using natural features and vegetation, various types of constructed facilities such as diversions, settling basins, skimming devices, dikes, waterways and ponds may be used. Preference must be given to designs using surface drainage, vegetation and infiltration rather than buried pipes and human-made materials and facilities.
(B) Specific standards.
(1) Impervious surface coverage of lots must not exceed 25% of the lot area.
(2) When constructed facilities are used for stormwater management, documentation must be provided by a qualified individual that they are designed and installed consistent with the field office technical guide of the local soil and water conservation.
(3) New constructed stormwater outfalls to public waters must provide for filtering or settling of suspended solids and skimming of surface debris before discharge.
(Ord. 31, passed - -1995)