§ 113.04  CONDITIONAL USE PERMIT APPLICATION.
   (A)   An application for a mining, extraction or excavation conditional use permit shall be filed with the office of the City Zoning Administrator on forms prescribed by the city.
   (B)   The application shall contain the following information:
      (1)   The name, address and signature of the owner(s) of the property;
      (2)   The name, address and signature of the operator(s);
      (3)   An accurate legal description of the property where the mining, excavation or extraction shall occur;
      (4)   A map of the property where the mining, excavation or extraction is to occur that clearly indicates the property lines and the limits of the proposed activity. Topographic data, including contours at ten-foot vertical intervals, watercourses, marshes, floodplain, wooded areas, rock outcrops, power transmission poles and lines, existing wells and other significant features shall also be shown;
      (5)   A narrative outlining the type of material to be mined, extracted or excavated, mode of operation, and an estimate of the amount of material to be removed, plans for blasting, location of settling ponds and outlets, and other pertinent information to explain the request in detail;
      (6)   A narrative outlining the type of processing to be included in the operation;
      (7)   A fee as established by resolution of the City Commission;
      (8)   A general location map showing the proposed site in relation to any city within one mile;
      (9)   A map showing access routes between the property and the nearest arterial road;
      (10)   A map showing location and name of roads or streets, right-of-way width, railroads and trails on or adjacent to the property;
      (11)   Easements, identifying widths and identifying utility or other uses on adjacent property;
      (12)   Natural land features showing locations of water courses and drainage ways, floor of record, wetlands, sinkholes, basins and wooded areas;
      (13)   Human-made features: buildings and other structures, wells, dams, dikes and impoundments of water;
      (14)   Processing areas shall be identified and boundaries shown;
      (15)   Dust control plan;
      (16)   Access road to processing and mining areas shall be shown;
      (17)   Proposed location of principal service or processing buildings or enclosures shall be shown, as well as location of settling basins and process water ponds;
      (18)   The operator shall indicate if blasting is proposed as part of the operation and frequency of blasting;
      (19)   Any other information or reports the Zoning Administrator or City Commission deems necessary for purposes of evaluating environmental or aesthetic impacts; and
      (20)   Reclamation plan in conformance with § 113.10.
(Ord. 102, passed 10-24-2007)