1. Site plans shall be drawn to a scale not less than one inch = 50 feet, titled “Preliminary Site Plan”, and include space for revision numbers and revision dates to track each update to the site plan.
2. The site plan scale drawing, or supporting plan sheets, shall contain, but not be limited to, the following minimum information, along with any other information necessary to demonstrate compliance with all applicable development requirements. This list is not intended to be inclusive of all details that are required to be submitted with the site plan application:
a. Site Design:
(1) Driveways, streets, and rights-of-way.
(2) Clear sight visibility areas.
(3) Surfacing materials.
(4) All easements and name of the easement holder.
(5) Location and dimensions of structures and signs.
(6) Sidewalks, ramps, and accessibility improvements.
(7) Off-street parking spaces, accessible spaces, and driveway aisle dimensions.
(8) Tabulation of required / provided off-street parking spaces, landscaping, open space, etc.
(9) Fire lanes, fire hydrants, fire department connection locations, and a fire coverage plan.
(10) Loading and refuse areas.
(11) Exterior lighting and a lighting plan.
(12) Locations of any proposed outdoor uses.
(13) Required bufferyards and screening.
(14) Landscaping, both graphically as to size and location, and in tabular form showing the amount of landscaping required and the amount to be provided.
(15) Topography, including grading, drainage, and stormwater runoff prevention plan.
(16) Soils report and narrative.
(17) Adequate trip generation details to determine if the developer will be responsible for any traffic impact mitigation improvements, as set out in Title 12, Section 12-4-1, Responsibilities of the Subdivider or Developer.
(18) Specific areas proposed for specific types of land uses.
(19) Existing and proposed utilities, utility meters, and utility connections.
(20) Lots and property lines.
(21) Areas proposed for dedication to the City.
b. Building Design Standards:
(1) Illustrations and supporting detail to demonstrate how the standards of Chapter 4, Subchapter 4, Design Standards, will be satisfied, including with regard to:
(A) Required exterior finish materials, and within minimum required and maximum permitted amounts.
(B) Appropriate location and required screening of mechanical and utility equipment.
(C) Required articulation of building walls and rooflines and use of architectural design features to mitigate building mass, create visual interest, and avoid monotonous appearance. (Ord. 746, 11-14-2017)