§ 150.58 APPLIANCES AND INSTALLATION.
   (A)   Only approved appliances shall be installed and no attachments, device or accessory shall be used or installed which affects proper combustion or safety.
   (B)   All gas appliances shall be connected with gas turned off and all appliance connections shall be tested with soap and water immediately after installation.
   (C)   No rubber hose, rubber tubing or lead pipe shall be used for connecting appliances, except on appliances which are necessarily portable and then the connection must be of proper design, good quality and properly approved. In addition, a shut-off valve shall be provided readily accessible and firmly connected to the rigid pipe connection.
   (D)   All automatic gas water heaters shall be provided with automatic safety pilot. All water heaters shall be vented properly whenever possible or practical and shall never be installed in bath or bedroom.
   (E)   All gas burning appliances shall be so located and installed so that they will be readily accessible for operation and adjustment and no appliance shall be installed in any location where the facilities for ventilation do not permit sufficient air for proper combustion at all times.
   (F)   All individual appliance regulators shall be properly vented into the combustion chamber of the appliance.
(1989 Code, § 150.58) (Ord. 671, passed - -1951)