(a) Pavements. The developer shall design and construct on each local street a pavement with a width of eighteen feet comprised of asphalt and in accordance with general plans and profiles for Standard Curbless Pavement With Roadside Ditches utilized by the Village Engineer and presently on file with the Building Official. The Commission may require higher standards and/or greater widths than those set forth above, because of extraordinary traffic loads or unusual soil conditions in specific locations.
(b) Access Drives. An access drive shall be not more than sixteen feet wide. The flare for driveways shall be at least three feet wider than the pavement on each side, the grade of the apron shall not exceed five percent for a distance of twenty feet from the edge of the street pavement, and the maximum grade of the access drive shall not exceed ten percent.
(Ord. 2362. Passed 10-9- 89; Ord. 2014-03. Passed 4-8-14.)