Lots within subdivisions shall conform to the following standards.
(A) The lot size, width, depth, and shape in any subdivision proposed for residential uses shall be appropriate for the location and the type of development contemplated.
(B) Lot areas shall conform to at least the minimum requirements of the zoning code.
(C) Lot widths shall in no case be less than that required by the zoning code for the district in which the subdivision is proposed.
(D) Building setback lines shall conform to at least the minimum requirements of the zoning code.
(E) Excessive depth in relation to width shall be avoided. A depth-to-width ratio of three to one shall normally be considered a maximum.
(F) Corner lots shall be platted a minimum of at least ten feet wider than minimum width interior lots in order to permit conformance to set back lines on side lotted streets.
(‘83 Code, § 151.38) (Ord. 70-008, passed 7-27-70) Penalty, see § 10.99