Zoning and Subdivision Fees and Fines | Fee/Fine |
Zoning and Subdivision Fees and Fines | Fee/Fine |
Appeal (of any) | $150 |
Appeal decision of Building Inspector | $75 |
Conditional use permits | $75 |
CPDD site plan review | $150 |
Expansion of nonconforming use request | $150 |
Final plat review | $150 |
Pre-annexation agreement | Equal to fee charged by County Recorder |
Preliminary plat review | $15 per lot - minimum $150 |
Preliminary-final plat review | $150 |
Rezoning request | $150 |
Special use permits | $100 |
Site plan review | $150 |
Tents for special events, construction trailers, temporary real estate offices | $30 |
Variances | $100 |
Wireless telecommunications facility review | Fee to cover engineer/consultant costs and/or radio frequency intermodulation study |
Collocation onto an existing tower | $1,000* |
Attachment to existing building or structure | $500* |
Modification of approved WCF | $500* |
New WCF | $500* |
Violation of site plan requirements | Not less than $250 nor more than $1,000 for the first offense. For the second and subsequent offences, the fine shall not be less than $500 nor more than $1,000 for each violation |
Zoning exception requests | $75 |
Commercial and institutional buildings (when finished for retail or office use) | $20 for first $1,000 cost and $10 for each additional $1,000 or fraction thereof |
Fences, swimming pools | $30 |
Finish basement/convert garage/attic to living space | $0.10 per sq. ft. |
Multi-family residential buildings (not including basement unless finished for living space) | $20 for first $1,000 cost and $10 for each additional $1,000 or fraction thereof |
Nonresidential change of use or remodel | $20 for first $1,000 cost and $10 for each additional $1,000 or fraction thereof |
Overall Code Review appeals | $100 |
Residential decks/ramps/porches | $25 for the first 100 sq. ft. and $0.20 for every additional sq. ft. |
Residential garages (attached or detached) | $25 for the first 100 sq. ft. and $0.20 for every additional sq. ft. |
Residential roofing permit (single-, two- and multi-family) | $25 |
Roofing permit (commercial, institutional, warehouse and industrial buildings) | $75 |
Single-family and two-family residences (not including basement unless spilt foyer or finished for living space) | $250 for the first 1,000 sq. ft. and $0.20 for every additional sq. ft. |
Single-family and two-family residential unfinished basement | $25 for the first 100 sq. ft. and $0.20 for every additional sq. ft. |
Utility sheds - under 150 sq. ft. | $30 |
Warehouse and industrial buildings (when primarily unfinished) | $20 for first $1,000 cost and $10 for each additional $1,000 or fraction thereof |
Demolition Permits | Fee |
Up to 400 sq. ft. | $15 |
401 to 2,000 sq. ft. | N/A |
Over 2,000 sq. ft. | N/A |
Nonresidential buildings over 400 sq. ft. | $75 for first 2,000 sq. ft. and $1 per each additional sq. ft. or fraction thereof |
Single-family and two-family residences | $40 |
Detached garages | $20 |
Electric heat in single-family and two-family residences (baseboard) | $25 per residential unit |
New single-family and two-family residences (complete except electric heat, temporary service and permanent service) | $60 per residential unit |
Multi-family, commercial or industrial wiring | $20 first $1,000 cost or contract bid and $10 each additional $1,000 or fraction thereof |
Permanent service (single-family and two-family residences) | $40 for one meter or unmetered and $10 additional meter opening |
Room additions or rewiring of existing rooms | $15 per room |
Signs | $20 per unit |
Temporary service | $20 per unit |
Mechanical Permits | Fee |
Multi-family, institutional, commercial or industrial furnaces or boilers and related duct work and/or piping | $20 first $1,000 cost or contract bid and $10 each additional $1,000 or fraction thereof |
Single-family and two-family residential furnaces or boilers | $20 per unit |
Moving Permits | Fee |
Small buildings, such as garages, moved on motor trucks or trailers | $25 |
All other buildings | $100 |
Plumbing Permits | Fee |
Cross-connection control devices | $15 |
Multi-family, institutional, commercial and industrial plumbing | $20 first $1,000 cost or contract bid and $10 each additional $1,000 or fraction thereof |
Single-family and two-family residences | |
Each plumbing fixture | $10 |
Water heater | $15 |
Single-family and two-family residences (Cont’d) | |
Rough-in inspection (stack/main drain) | $15 |
Water conditioner | $10 |
Water service inspection | $20 inside corporate limits and $40 outside corporate limits |
Sign Permits | Fee/Fine |
For the first 50 sq. ft. | $20 |
50 sq. ft. to 300 sq .ft. | $30 |
Each additional 300 sq. ft. or part thereof | $30 |
Inflatable sign | $30 |
Violation of sign regulations | Fine: Not less than $250 nor more than $1,000 for the first offense. For the second and subsequent offenses, the fine shall not be less than $500 nor more than $1,000 for each such violation |
* The city reserves the right to employ a qualified engineer or consultant to assist in technical reviews. Fees up to $1,500 shall be reimbursed by the applicant prior to TUP approval. | |
(Ord. 10-3277, passed 1-4-2010; Ord. 22-3682, passed 10-3-2022)