(A) The consumer's premises shall be open at all reasonable times to the PWD for the inspection of the presence or absence of cross-connections within the consumer's premises and testing, repair and maintenance of cross-connection control devices within the consumer's premises.
(B) On request by the PWD, the consumer shall furnish information regarding the piping system or systems or water use within the customer's premises. The consumer's premises shall be open at all reasonable times to the Superintendent of Water for the verification of information submitted by the inspection consumer to the public water supply custodian regarding cross-connection inspection results.
(C) It shall be the responsibility of the water consumer to arrange periodic surveys of water use practices on his or her premises to determine whether there are actual or potential cross-connections to his or her water system through which contaminants or pollutants could backflow into his or her or the public potable water system. All cross-connection control or other plumbing inspections must be conducted according to the ILCS Ch. 225, Act 320, § 3(1).
(D) It is the responsibility of the water consumer to prevent backflow into the public water system by ensuring that:
(1) All cross-connections are removed, or approved cross-connection control devices are installed for control of backflow and back siphoning.
(2) Cross-connection control devices shall be installed per the manufacturer's instructions.
(3) Cross-connection control devices shall be inspected at the time of installation and at least annually by the PWD. The inspection of mechanical devices shall include physical testing per the manufacturer's instructions.
(4) Testing and records.
(a) Each device shall be tested at the time of installation and at least annually or more frequently if recommended by the manufacturer.
(b) Records submitted to the community public water supply shall be available for inspection by the PWD or IEPA personnel per ILCS Ch. 415, Act 5, § 4.
(c) Each device shall have a tag attached listing the date of the most recent test, the name of the CCCDI and the type and date of repairs.
(d) A maintenance log shall be maintained and include the following: date of each test; name and approval number of person performing the test; test results; repairs or servicing required; repairs and date completed; and serving performed and dated completed.
(Ord. 1122, passed 12-20-99)