Section 89.108.4.1 the 2022 Edition of the California Electrical Code, is hereby amended to add subsection 89.108.4.1.1 as follows:
Section 89.108.4.1.1. Requirements for Permit. The application for an electrical permit shall be in writing on forms furnished by the Community and Economic Development Department and shall be filled out in full stating the location by street and number of the building, or place where the work is to be performed, the name and address of the owner, the name and address of the person who will do the work, and a statement that such person has a State Contractor’s License when such work is for occupancies other than R-3 or U. Applications shall contain or be accompanied by a plan, when required by the Fee Schedule, showing the entire amount of work contemplated, the character of such work, and a diagram of wiring showing all outlets, meter locations, load centers, conduit and wire sizes, the length of runs and circuits, and, as nearly as possible, the manner in which all wire and other electrical connections and equipment are to be installed, together with all other information required by the Building Official. All plans submitted requiring a connected load of 400 or greater amperes, or 600 volts to ground, or greater, shall be prepared by an Electrical Engineer registered by the State of California and each sheet shall bear his registration number, date of expiration and signature.
(Ord. 3316 § 3 (part), 2022).