15.20.130. Development standards.

   A.   The following standards identified in Table 15.20.130.A shall apply to PRD-I zoned development as follows.

   •   Edge Condition Sites as defined in Chapter 15.04 shall utilize any Building Type identified as appropriate based on the Street Type.

   •   Embedded Sites as defined in Chapter 15.04 shall utilize only the Building Type(s) identified as appropriate based on the Street Type which reflect the density range of the majority of surrounding properties. Density ranges are located in Table 15.10.020.A in Chapter 15.10.

   B.   Building Types shall be in accordance with Chapter 15.10.

   C.   Frontage Types shall be in accordance with Chapter 15.12.

Table 15.20.130.A Building Types, Frontage Types, and Maximum Stories Standards
Building Type	Street Type
	Major Arterial	Primary Arterial	Secondary Arterial	Local Collector	Neighbor_hood Street
Building Type
House				P	P
Rowhouse	P	P	P	P	P
Duplex/Triplex/Quadplex			P	P	P
Bungalow Court		P	P	P	P
Shopkeeper	P	P
Tuck-Under	P	P	P	P	P
Frontage Type
House				Porch	Porch
				Stoop
Rowhouse	Stoop2	Stoop2	Porch	Porch	Porch
			Stoop	Stoop
Duplex/Triplex/Quadplex			Porch	Porch	Porch
			Stoop	Stoop
Bungalow Court		Porch1	Porch	Porch	Porch
		Stoop1	Stoop	Stoop
Shopkeeper	Shopfront	Shopfront
Tuck-Under	Porch1	Porch1	Porch	Porch	Porch
	Stoop2	Stoop2	Stoop	Stoop

 

P = Permitted

1 Frontage Type is permitted with the side elevation of the building facing the street. The building shall be designed with the frontage turned to the side facing a common open space area.

2 Frontage Type is permitted with the front elevation of the building facing the street.

3 Also applies to private streets internal to a site.

Building Type	Street Type
	Major Arterial	Primary Arterial	Secondary Arterial	Local Collector	Neighbor hood Street2
Maximum Stories
House				2	2
Rowhouse	3	3	2	2	2
Duplex/Triplex/Quadplex			2	2	2
Bungalow Court		2	2	2	2
Shopkeeper	3	3
Tuck-Under	3	3	2	2	2

 

(Ord. 3229 (part), 2016).