(A) Minimum lot width and area requirements shall conform to the requirements of the zoning district or districts in which the property is located. Lot width shall be measured between side lot lines at the required setback from the lot front.
(B) Every lot shall front upon and have at least the minimum required frontage on a dedicated public street of sufficient width and improvement as per city standards and specifications.
(C) The residential lot arrangement of a subdivision shall be accomplished in such a manner that there will be no double frontages. However, in circumstances where the subdivision abuts an arterial street, double frontage lots may be approved when access from the lot is only to the interior, local street. Where double frontage lots are allowed, the subdivider, the subdivider's successors and assigns shall relinquish the right of access from the lot to the arterial street and place restrictions upon the land to run with the land relinquishing said access.
(D) Lots shall be numbered consecutively throughout the entire subdivision.
(E) At street intersections the property or right-of-way lines of corner lots shall be rounded at the street intersection corner with an arc which shall have a minimum radius as per standards and specifications of the Board of Public Works.
(F) All lot corners not marked by concrete monuments shall be marked as specified under applicable state statute.
(Ord. G-14-93, passed 5-4-93)