Commercial uses and buildings may be included within the proposed PUD. The permitted uses and lot, building and setback requirements found in the B-2 General Commercial District shall apply to the commercial uses and buildings in the PUD Commercial District. Such commercial uses may not exceed five percent (5%) of the total PUD area. In addition, the following design standards shall apply:
(a) The commercial uses and structures shall be clustered to provide common parking and ingress and egress points to reduce the number of intersections.
(b) Any combination of screens and landscaping shall be provided on the perimeter of the commercial areas abutting on any residential areas.
(c) The commercial areas shall be provided with adequate and properly arranged facilities for internal traffic circulation, landscaping and other such features and facilities necessary to make the project attractive and efficient for the residential development. The design of the structures shall be harmonious with the design of the residential areas within the PUD.
(d) All areas designed for further expansion or not intended for immediate improvement shall be landscaped or maintained in a neat and orderly manner as specified by the Planning Commission.
(e) Variations from the lot, setback and building requirements may be permitted when necessary to allow for a more efficient design of the proposed PUD.
(f) Each foot of building height over the maximum height regulations shall cause the required distance between the buildings and the side and rear property line of the PUD District to be increased by one (1) foot.
(Ord. 2020-4053. Passed 1-7-21.)