(a) Roof-mounted stations or antennas shall be considered accessory structures and shall comply with the following conditions and requirements:
(1) Such a station or antenna shall be mounted directly on the flat roof (no slopes) of a primary or accessory structure and shall not be mounted on a appurtenance, such as a chimney, tower or spire.
(2) The diameter of any dish station or antenna mounted upon the roof of a primary accessory structure shall not exceed six (6) feet.
(3) Such a station or antenna shall not exceed a height greater than eight (8) feet above the roof on which it is mounted. The height shall be measured vertically from the point at which such station or antenna is mounted on the roof.
(4) Such a station or antenna shall reasonably blend with the surrounding landscape and shall be properly screened as determined by the Zoning Administrator.
(5) A building permit and a zoning certificate issued by the Zoning Administrator shall be required for such a station or antenna.
(6) Such a station or antenna shall be permitted on commercial buildings only.
(7) There shall be a required setback from the parapet wall. The setback formula shall be determined by the Zoning Administrator.
(8) The installation of such a station or antenna shall be inspected by the Zoning Administrator and the authority having jurisdiction.
(Ord. 2010-059. Passed 3-7-11.)