(B) On a corner lot, no curb cut shall be located closer than 40 feet to the curb line intersection of streets.
(C) Curb cuts shall not be located closer than 20 feet to a side or rear lot line, and the distance between separate curb cuts serving adjacent land uses shall not be less than 40 feet, unless one or more of the following circumstances apply:
(1) A common curb cut serves adjacent land uses;
(2) Curb cuts cannot meet separation standards due to narrow lot frontage;
(3) Curb cuts cannot meet separation standards due to location of existing cuts on adjacent lots; or
(4) A professional traffic engineer, after preparing a traffic study, recommends that curb cuts be located closer to interior lot lines in order to maintain a safe distance from street intersections.
(D) (1) An industrial lot or industrial complex with less than 300 feet of frontage shall have no more than two curb cuts on any single right-of-way.
(2) One additional curb cut may be allowed for each additional 300 feet of frontage on a single right-of-way.
(3) Curb cuts shall have a minimum distance of 40 feet between them.
(Ord. 2008-001, passed - -2008) Penalty, see § 155.999