The petitioner shall furnish the following drainage improvements along public rights-of- way of the town for the particular development.
(A) Driveway drainage pipes. Metal, reinforced concrete, or polyethylene type –12 pipe in a specified size shall be installed as directed in drainage ditches and under driveways, with not less than 12 inches of aggregate coverage over the top of the pipe.
(B) Surface control. Where curb and gutter and/or underground drainage is not provided, a drainage swale shall be constructed running adjacent to and parallel with the street in a dedicated drainage easement with its low point at least 12 inches below the elevation of the sub grade of the pavement.
(C) Tile.
(1) Installation of field tile or other suitable conduit for drainage of roadside water shall be permitted; provided, that, the top of the aggregate cover over the pipe is at least 12 inches below the surface of the pavement adjacent to the tile or conduit.
(2) Tile shall be a minimum of 12 inches in diameter, however, tile size shall be modified as required by the installation.
(D) Tracing wire. Tracing wire shall be installed with all non-metallic pipes where both ends of the pipe are not visible from one point.
(Ord. 03-05, § 813-30, passed 5-27-2003)