(a) Siting Requirements. Any factory-built housing proposed to be located in any district shall comply with the following requirements:
(1) The structure shall be installed upon and properly attached to a foundation system that provides adequate support of the structure's vertical and horizontal loads and transfers these and other imposed forces, without failure, from the structure to the undisturbed ground below the frost line.
(2) All hitches, axles, wheels and conveyance mechanisms shall be removed from the structure.
(3) The structure shall be so oriented on the site that its long axis is parallel with the street, and it shall have an entranceway facing the street, except where diagonal placement and the addition of a garage, carport, or other accessory structure may be permitted by subdivision regulation and yard requirement.
(b) Exterior Siding. Exterior siding for all residential structures, including factory-built housing, shall consist of one or a combination of materials such as brick, stone, stucco, clapboard or clapboard-simulated vinyl or metal, wood shingles, shakes or similar material (no smooth, ribbed or corrugated metal, fiberglass or plastic). Siding must extend to the ground level, or to the top of the foundation when a solid concrete or masonry perimeter foundation is used.
(Ord. 577. Passed 1-27-92.)